Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Burbank, CA
Chimney repair in Burbank usually means one of two things: a clay flue tile that cracked decades ago and was never addressed, or a chimney cap that gave up during a Santa Ana wind event. We’re Chimney Sweep Arleta, and we work on the original masonry fireplaces that came with Burbank’s 1920s through 1960s homes. If you’re seeing water stains near the fireplace, hearing birds inside the flue, or your insurance company sent a letter asking about your chimney’s condition, call (833) 958-9616 and we’ll send someone out to look. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Burbank Homes Are Different
Burbank’s housing stock runs older than most of the Valley. The neighborhoods around Magnolia Park and the hillside streets below the Verdugo Mountains are full of 1920s and 1930s Spanish Colonial bungalows, and a lot of them still have their original clay flue liners. Clay tile was standard for the era, but it doesn’t handle decades of heating and cooling cycles well. By the time we’re called out, we often find hairline cracks that let heat and combustion gases reach the brickwork. That’s a fire risk and a carbon monoxide risk, and it’s the reason a routine sweep in Burbank sometimes turns into a liner recommendation.
The climate doesn’t help. Burbank gets hot, dry summers and mild winters, so fireplaces sit idle for months at a time between burns. Creosote hardens into a glaze that’s difficult to remove with standard brushes. Birds, squirrels, and debris move into uncapped flues during the long off-season. When you finally light a fire in November, you’re burning off whatever settled in there since March. Add in the chaparral terrain around the Verdugos and the Hollywood Hills, and the city’s high-fire-severity zone designation starts to make sense. A missing spark arrestor isn’t a minor detail here – it’s the difference between a contained chimney fire and an ember landing on a shake roof two houses down.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Burbank Services
Most Burbank homeowners call us for one of two things: a chimney that hasn’t been cleaned in years, or a dryer vent that’s been ignored even longer. Both are combustion-venting problems, and both are fire hazards when they’re neglected. Here’s what each one involves here.
Chimney Sweep in Burbank
A chimney sweep in Burbank on an older home is rarely just a brush job. We remove the creosote and soot, but we also inspect the clay flue tiles, the crown, the cap, and the flashing while we’re up there. On 1940s tract homes with original fireplaces, we’re looking for the cracked tile or missing spark arrestor that turns a cleaning into a repair. The Mediterranean climate means your chimney sat unused through a long, hot summer, and whatever accumulated in it hardened. We clean it, and if it needs repair, we fix it.
Dryer Vent Cleaning in Burbank
Dryer vent cleaning in Burbank matters because lint fires don’t care how old your house is. The older ranch homes and bungalows here often have long, winding dryer vent runs that were installed decades ago and never serviced. Lint builds up at every bend, the dryer works harder, and the vent eventually becomes a fire hazard. We treat this as a core service, not an upsell afterthought. Your dryer vent is a fire hazard too, and it deserves the same attention as your fireplace flue.
Chimney Repair in Burbank
Chimney repair in Burbank starts with the age of the house. Most of the 1920s through 1950s homes here were built with clay flue tile, and clay tile cracks. It cracks from decades of thermal expansion, from minor seismic activity, and from moisture that gets in through failed mortar joints. Once a tile cracks, the chimney can’t safely vent combustion gases, and the brickwork starts absorbing heat it was never meant to handle. We repair it, and when the liner is beyond patching, we install a DuraFlex stainless steel liner rather than trying to save what’s left. If you need chimney repair, we’ll show you exactly what we found and explain what we’re installing and why.
Chimney Cap Installation
Signs you need it
You hear birds or scratching inside the flue, water pools in the firebox after rain, or you can see that the old cap is rusted through or missing entirely.
What it costs in Burbank
Chimney cap installation in Burbank typically runs $200 to $450 depending on the flue size and whether we’re replacing the spark arrestor screen at the same time.
How we do it
We measure the flue opening, install a properly sized cap with a spark arrestor screen, and secure it so Santa Ana winds can’t lift it off.
Chimney Liner Installation
Signs you need it
Your clay tiles are cracked or spalling, the chimney fails a level 2 inspection, or you smell smoke or combustion gases inside the house.
What it costs in Burbank
Chimney liner installation in Burbank generally runs $1,800 to $3,200 for a typical single-story home, depending on flue length and liner diameter.
How we do it
We remove or bypass the failed clay tile, install a UL-listed DuraFlex stainless steel liner, insulate it where required, and reconnect the appliance.
What Chimney Repair Costs in Burbank
| Item | Typical range in Burbank |
|---|---|
| Chimney cap installation | $200 – $450 |
| Chimney liner installation | $1,800 – $3,200 |
| Chimney flashing repair | $350 – $800 |
How do I know if my chimney liner is actually bad?
We don’t guess, and we don’t recommend a liner because a worksheet says so. We run a camera up the flue and show you the footage. Cracked clay tile, gaps between sections, or spalling surfaces are visible on the screen. If your liner is intact, we’ll tell you that too, and you won’t pay for a repair you don’t need.
Can you repair a chimney liner without rebuilding the chimney?
In most Burbank homes, yes. We install an insulated stainless steel liner through the existing flue cavity, so the original brickwork stays in place. The liner becomes the new venting surface, and the old clay tile is simply bypassed. Call (833) 958-9616 for a free estimate.
Brands We Service in Burbank
We work with the same product lines professional chimney supply houses stock. That means DuraFlex for flexible stainless steel liners, HeatShield for resurfacing deteriorated flue interiors, and Gelco and Olympia Chimney components for caps, crowns, and chase covers. We don’t use hardware-store substitutes, and we’ll tell you exactly what’s going into your chimney before we install it. Here’s a look at our brands and what each one is used for.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Burbank, CA
| Service | Typical range in Burbank |
|---|---|
| Chimney sweep and inspection | $150 – $350 |
| Chimney cap installation | $200 – $450 |
| Chimney cap replacement | $250 – $500 |
| Chimney liner installation | $1,800 – $3,200 |
| Chimney flashing repair | $350 – $800 |
| Chimney crown repair | $400 – $1,000 |
| Dryer vent cleaning | $120 – $250 |
Two things push prices up in Burbank. First, older homes with original clay flues often need more than a cleaning once we get inside, and that’s when liner work or crown repair enters the estimate. Second, hilly streets and tight roof pitches make ladder work slower, and that labor is part of the written quote. Whatever the job is, the estimate is free, and the written figure is what you pay. No surprises after the work is done.
Neighborhoods We Serve in Burbank
We work throughout Burbank, from the flat streets west of downtown to the hillside homes under the Verdugos. The older the neighborhood, the more likely we are to find original masonry fireplaces and clay flue tile that needs attention.
- Magnolia Park
- Rancho Equestrian
- Hillside District
- Chandler Park
- Media Center
We’re based nearby and can usually get a crew to most Burbank addresses within the day. Fast dispatch from 7am to 7pm, Sunday through Friday.
Service Area – Cities Near Burbank
We also cover the surrounding Valley cities for chimney cleaning, repair, and dryer vent work. That includes North Hollywood, CA directly to the west, Glendale, CA to the east, Valley Village, CA just over the 170, and Studio City, CA to the southwest. If you’re in one of these areas and need a sweep or a liner inspected, the same crew and the same pricing apply.
Serving Burbank, CA – Our Local Coverage Area
We serve Burbank and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Burbank
We answer the phone 24/7 and dispatch crews from 7am to 7pm, Sunday through Friday. Most Burbank addresses are within our regular routing, so we can often schedule within a day or two. The estimate is free, and you’ll get a written price before any work starts.
Most chimney repairs like liner installation, cap replacement, and crown work don’t require a city permit, but major structural rebuilds might. We’ll let you know if your job crosses the threshold, and we can handle the paperwork if it does. Call (833) 958-9616 and we’ll walk you through it.
Yes. Burbank’s location between the Verdugo Mountains and the Hollywood Hills puts many homes in a high-fire-severity zone, and insurers are asking for chimney inspections more often. We provide the documentation your provider needs, and if we find damage, we’ll show you the camera footage so you’re not approving repairs blind.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Burbank Customers Say
"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Gabriela Mendoza"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Carmen Castillo"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Justin Kim