Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cleaning & Sweep Cost in Arleta?
Chimney cleaning in Arleta typically runs $150 to $290 for a standard sweep of a single wood-burning flue, with most homes landing near the $190 to $240 mark. Add an inspection and the number moves to $220 to $380 depending on how many flues and appliances are connected. If the sweep turns up cracked masonry or a failing liner, repair work is quoted separately from $400 to a few thousand, and you’ll get that number in writing before anyone starts.
Those ranges hold because we do the actual work here in Arleta and quote it accordingly. Every estimate is free, and the written estimate sets the final price. Call (833) 958-9616 to get one scheduled.
Chimney Cleaning & Sweep Cost Breakdown (2026)
Here’s how the numbers break down for a typical Arleta home. Prices are estimated ranges for this market as of 2026, and the written estimate is what governs the final bill.
| Service | Typical Range | What It Covers |
|---|---|---|
| Standard chimney sweep (one flue, wood-burning) | $150 – $290 | Removal of soot, creosote, and ash from flue and firebox |
| Sweep plus Level 1 inspection | $220 – $380 | Sweep plus a visual check of the firebox, flue, and damper |
| Second flue or appliance connection (gas insert, second fireplace) | +$80 – $150 each | Each additional flue cleaned and checked |
| Dryer vent cleaning (separate service) | $120 – $220 | Full duct run cleared from dryer to exterior |
| Stainless steel liner installation (DuraFlex) | $1,800 – $4,500 | UL-listed flexible stainless liner sized to the flue |
| Flue resurfacing (HeatShield) | $1,200 – $3,200 | Repair of deterioration on the flue interior without full relining |
| Crown, cap, or damper repair | $250 – $900 | Top-of-chimney structural work and cap replacement |
| Creosote removal, heavily glazed (Level 3) | $450 – $1,200 | Chemical or rotary removal when creosote has hardened |
What pushes a quote up most often is creosote. A home that burns regularly and skips a year can carry a layer that hardens into what the trade calls glazed creosote, and that takes more time and tools to remove than a routine sweep. Second is chimney type. A masonry chimney with a straightforward straight flue sweeps fast. A prefab with a chase or a flue with an offset in it takes longer. Third is what the sweep finds. If the flue lining is cracked or spalling, you’re now in repair territory, and that’s where DuraFlex liner or HeatShield resurfacing comes in. We carry the materials for both, so the person inspecting has the answer on the same visit rather than sending you to someone else. That whole path runs through chimney sweep Arleta, so nothing is being handled by a subcontractor.
What Affects Chimney Cleaning & Sweep Pricing in Arleta
- Chimney type and construction. Masonry versus prefab, straight flue versus offset, single versus multiple flues. A prefab unit with a narrow flue and a tight chase usually costs toward the top of the sweep range because access takes longer.
- How much creosote has built up. Annual burning without an annual sweep is the most reliable way to turn a $200 job into a $600 one. Glazed creosote removal is a different job than a routine cleaning, and it’s priced that way.
- Number of flues and connected appliances. One fireplace is the base price. A gas insert vented separately, or a second fireplace, adds to the visit. We quote each flue as its own line on the estimate so you can see exactly what you’re paying for.
- Roof access and height. A single-story ranch with a clean roof line is easy. A steep pitch or a chimney boxed in tight to the roofline slows the setup. Arleta’s mid-century housing stock ranges widely on this, and the estimate accounts for the actual access at your address.
- Whether repair is needed. Sweeping exposes the flue interior. If we find a crack, spalling, or a disconnected liner, that’s a separate quote with its own materials. The advantage of working with us is that we install the DuraFlex liner and HeatShield resurfacing ourselves rather than noting the problem and leaving.
- Dryer vent condition. A dryer vent that hasn’t been cleaned in years can carry compacted lint through long duct runs and elbows. The cleaning cost climbs with run length and the number of turns in the duct, since that’s real time on the job.
One thing that does not affect pricing here: the local climate. Arleta sits in the San Fernando Valley, and the burning season is shorter than in colder parts of the country. A mild winter doesn’t undo creosote buildup, though. Smoke and moisture still condense on the flue walls the same way, and the creosote still hardens between seasons. Homes that burn a few cords a year need the same cleaning schedule as anywhere else.
How to Save on Chimney Cleaning & Sweep
The single biggest way to keep costs down is to stop surprises from building up inside the flue. An annual sweep is cheaper than an annual sweep plus a liner. That’s the honest math. Skip two or three years and the quote for cleaning grows, then the repair quote gets added on top of it.
A few practical things that help:
- Sweep once a year if you burn regularly. If you light a fire most weeks during the burning season, an annual sweep is the schedule that keeps the flue in the routine range instead of the heavy-removal range.
- Burn seasoned wood. Wet wood produces more smoke, more condensation inside the flue, and faster creosote buildup. This isn’t a sweep cost item so much as a way to lower the frequency of expensive extra work.
- Have the dryer vent cleaned at the same visit. Combining chimney and dryer vent work into one appointment saves the setup time and keeps the total visit cost below two separate trips. Your dryer vent is a fire hazard too, and it’s included as a core service here rather than an add-on.
- Get the estimate in writing and free. Ask for line items. A quote that says “chimney cleaning: $350” without breaking out the flue count, the inspection, and anything extra leaves you guessing. Our estimates list the work.
- Read what’s being installed before you agree. We use professional-grade materials by name, DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield, so you can look up exactly what’s going in. A generic liner with no brand attached is a cost you can’t verify.
Free estimates on all of it. Call (833) 958-9616 and we’ll get a technician scheduled. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What Does a Chimney Sweep Actually Do for the Price?
A sweep here runs about $150 to $290, and that price covers more than brushing a flue. The technician sets up floor protection, works from the firebox up and from the roof down depending on the chimney’s design, removes soot and creosote from the flue walls, clears the smoke shelf and damper, and vacuums the firebox clean. It’s a controlled process with dust containment, not a quick scrub.
Part of what you’re paying for is what the technician sees while doing the work. A sweep is the only time anyone has eyes on the flue interior. Cracks in the clay tile, gaps at the mortar joints, a damper that no longer seals, a crown that’s started to break apart at the top. Those are the things that turn a chimney into a problem, and the sweep is when they get found. When repair is called for, we handle it in-house with HeatShield resurfacing for deteriorating flue interiors or a DuraFlex stainless liner installation for masonry and prefab chimneys alike. Nobody is handed off to another company.
Does Dryer Vent Cleaning Cost the Same as Chimney Cleaning?
Dryer vent cleaning runs $120 to $220, and it’s priced separately from the chimney sweep because it’s a separate system. That said, most of our customers in Arleta have both done at the same appointment. One visit, both systems cleared, and a lower combined total than two trips.
Here’s why we treat dryer vents as a real service and not an upsell. Lint accumulates in the duct run and around the dryer, and it’s highly flammable. A clogged vent also makes the dryer work harder and run longer, which is a cost you’re paying on every load. The cleaning itself involves running a brush through the full duct from the dryer connection to the exterior termination, checking the exterior hood and damper, and clearing the lint trap housing. If the run has multiple elbows or a long vertical section, the cost goes toward the upper end of the range because that’s more time, not because the price is padded.
Why Do Some Chimney Quotes in Arleta Come In Much Lower?
A low quote usually means the work is being done by someone who doesn’t install liners or resurface flues. The sweep is all they offer, so that’s what they quote. When the inspection turns up a problem, they hand you a name and send you elsewhere. That’s not a cheaper job; it’s a smaller job.
The other common gap is materials. A quote that comes in far below the market for a liner installation is usually using a generic product rather than a professional-grade system. DuraFlex liner installations use UL-listed flexible stainless steel, matched to the appliance and the flue. HeatShield resurfacing is a recognized repair method for a deteriorating flue interior. When those brand names are on the estimate, you can verify what’s being installed and compare it honestly to another quote. Generic product with no brand is a number you can’t check.
We clean it, and if it needs repair, we fix it. One provider for the chimney, the dryer vent, and the structural work that ties them together. That’s the entire scope.
FAQs – Chimney Cleaning & Sweep Cost
How much does a chimney sweep cost in Arleta?
A standard chimney sweep in Arleta costs $150 to $290 for a single wood-burning flue, and most homes land around $190 to $240. Adding a Level 1 inspection brings the total to $220 to $380. That’s for a typical masonry or prefab chimney with one flue. Homes with multiple flues or a connected gas insert add $80 to $150 per additional flue. Call (833) 958-9616 for an exact figure on your address. Estimates are free.
Can you come today?
Same-day service is often possible depending on the schedule. We answer 24/7, and crews dispatch from 7am to 7pm, Sunday through Friday. Calls outside dispatch hours get booked into the next opening. Call (833) 958-9616 to check availability for today.
Is it cheaper to repair or replace a chimney liner?
Repair is usually cheaper when the damage is limited. HeatShield resurfacing typically runs $1,200 to $3,200, while a full DuraFlex stainless liner installation runs $1,800 to $4,500. The right answer depends on how much of the flue interior is failing. If the damage is isolated, resurfacing can restore it without a full reline. If the lining is cracked through in multiple places, a full stainless liner is the durable fix. We quote both when both are viable, so you can see the numbers side by side.
How often does a chimney in Arleta need cleaning?
Once a year if you burn regularly, which means fires most weeks through the burning season. The shorter Valley winter doesn’t change the creosote math. Smoke and moisture still collect on the flue walls, and the deposits harden between seasons. Skipping a year usually means the next cleaning is a heavier job, and the cost moves from the $150 to $290 range toward $450 to $1,200 if glazed creosote has formed.
Does the sweep include an inspection?
Not in the base sweep price, but it’s included as part of the visit in the $220 to $380 combined range. The inspection is a visual check of the firebox, flue, damper, and chimney exterior, and it’s the part of the job that catches problems while they’re still cheap to fix. If we find something that needs repair, we quote it with the specific materials, DuraFlex, HeatShield, or the appropriate Famco or Olympia Chimney component, so you know exactly what’s involved. Call (833) 958-9616 for a free estimate.
What Happens When You Call
You’ll get a straightforward conversation about your chimney and your dryer vent. Tell us what you have, wood-burning fireplace, gas insert, prefab, whatever it is, and how long it’s been since the last cleaning. We’ll figure out what the visit needs and give you a written estimate before anything starts. If the inspection turns up repair, that’s quoted too, with the materials named, so nothing is a surprise on the invoice.
We’ve been serving Arleta since 2017, and the work covers the full venting system: inspection, cleaning, and repair. Professional-grade materials, by name. One call covers your chimney and your dryer vent. Call (833) 958-9616 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, closed Saturday.
Pricing reflects the Arleta market as of 2026. Chimney Sweep Arleta offers free estimates – call (833) 958-9616.
What Our Customers Say
"We manage six rental properties and I've now sent them to four of them. Consistent every single time, which is not something I can say about most vendors we use."
- Henry Tran"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Holly Novak"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Gabriela Mendoza