Gas fireplace service
Sweep & inspection
Caps & crowns
Flue relining
Masonry repairLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fireplace Services Cost in Arleta?
Fireplace services in Arleta typically run from about $150 to $350 for a standard chimney sweeping and inspection, while repair work such as a DuraFlex liner installation ranges from roughly $2,200 to $5,500 depending on flue size and chimney height. Dryer vent cleaning, which we treat as a safety service rather than an add-on, usually falls between $120 and $225. Those are the ranges homeowners in Arleta actually see; your written estimate sets the final price.
Arleta sits in the northeast San Fernando Valley, where a dry climate means fireplaces get used hard in the cooler months and then sit unused for long stretches. That pattern is exactly what produces the buildup and deterioration we find on most inspections. For a neighborhood-oriented overview of what we do, see our chimney sweep Arleta page. If you want a free estimate, call (833) 958-9616. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Fireplace Services Cost Breakdown (2026)
The table below gives typical estimated ranges for the work we perform in Arleta. Every job is different, and the written estimate is what governs what you actually pay.
| Service | Typical Estimated Range |
|---|---|
| Chimney sweeping (standard masonry fireplace) | $150 – $350 |
| Level 2 inspection with video scan | $225 – $450 |
| Dryer vent cleaning | $120 – $225 |
| Chimney cap installation | $200 – $550 |
| Crown repair or rebuild | $500 – $1,800 |
| Masonry tuckpointing | $600 – $2,500 |
| HeatShield flue resurfacing | $1,600 – $4,200 |
| DuraFlex stainless liner installation | $2,200 – $5,500 |
| Firebox repair | $700 – $2,800 |
| Gas insert service and venting check | $175 – $400 |
What pushes a job toward the top of a range? Chimney height is the biggest single factor, because a taller flue means more liner material, more labor, and sometimes staging. Flue shape matters too: an oversized or offset flue takes more prep before a liner can go in. The degree of deterioration drives the rest. A flue with light surface spalling cleans up and gets a straightforward sweep; a flue with crumbling mortar joints needs resurfacing or relining, and there’s no way around the added material cost.
The other thing that moves pricing is what’s already in the chimney. A previous install done with off-brand components can require partial removal before we can fit DuraFlex or apply HeatShield. We see that often in older Valley homes where a liner was added decades ago and never documented.
What Affects Fireplace Services Pricing in Arleta
- Chimney height and access. Single-story ranch homes common across Arleta are quicker to service than two-story rooflines. Height adds material and time, and the estimate reflects both.
- Flue condition and size. A flue that’s properly sized for the appliance takes a standard liner. An oversized flue needs insulation or an adapter, which adds cost.
- Type of appliance. Wood-burning fireplaces, gas inserts, and freestanding stoves each need different venting checks. Gas insert service tends to sit at the lower end because there’s no creosote to remove.
- Masonry damage above the roofline. Arleta’s hot, dry summers and mild winters are hard on mortar crowns and caps. Sun exposure and seasonal temperature swings crack crowns over time, and a cracked crown lets water into the chimney. That repair is separate from the sweep.
- Whether repair is needed at all. A cleaning-only visit is the cheapest outcome. When inspection turns up a deteriorated flue interior, HeatShield resurfacing or a DuraFlex liner is the fix. We quote it as a separate line item so you can see exactly what you’re paying for.
- Dryer vent routing. A short, straight run to the exterior wall cleans quickly. A long run with multiple elbows, or one that terminates on the roof, takes longer and costs more.
One local note worth knowing: many Arleta homes were built with fireplaces that share a chase with the furnace flue, and those chases age differently than a standalone masonry chimney. When we inspect, we look at the whole chase, not just the fireplace flue. That’s part of why we stock Famco venting components and Olympia Chimney parts: replacing a shared-chase component with mismatched hardware creates problems down the road. Here’s what we’re installing and why, every time.
How to Save on Fireplace Services
The cheapest fireplace service is the one you do before damage sets in. A sweep and inspection now costs a fraction of a liner installation later. Beyond that, a few practical habits keep costs down.
- Book the sweep before the season starts. Scheduling ahead of the cooler months means you’re not paying for urgency, and you get a clear picture of flue condition before you burn through a winter.
- Burn seasoned wood. Green or unseasoned wood produces far more creosote, which means more frequent sweeps and a higher risk of a chimney fire. Dry wood burns cleaner and saves you money on cleaning frequency.
- Get the dryer vent cleaned on the same visit. One call covers your chimney and your dryer vent, which cuts down on separate scheduling and travel. It also addresses a fire risk most chimney-only companies never mention.
- Fix small masonry issues early. A cracked crown or a loose cap is a modest repair. Left alone, water intrusion turns it into a rebuild.
- Ask what brand is going in. DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield are all professional-grade lines. When a bid is dramatically lower than others, ask what material is being used. Generic substitutes cost less upfront and more later.
Estimates are free, and we’ll walk you through exactly what the work involves before anything starts. Call (833) 958-9616. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
FAQs – Fireplace Services Cost
How much does a chimney sweep cost in Arleta?
A standard chimney sweep in Arleta typically costs $150 to $350 for a masonry fireplace. If the inspection turns up a deteriorated flue or damaged crown, those repairs are quoted separately so you can see the breakdown. Call (833) 958-9616 for an exact quote. Estimates are free.
Is it cheaper to repair or replace a chimney liner?
Repair is almost always cheaper when the damage is limited to the flue interior, with HeatShield resurfacing typically running $1,600 to $4,200 versus $2,200 to $5,500 for a full DuraFlex liner installation. Replacement makes more sense when the existing liner is failing outright or was never sized correctly. A Level 2 inspection tells you which situation you’re in. Call (833) 958-9616 to book one.
How much does dryer vent cleaning cost in Arleta?
Dryer vent cleaning in Arleta typically runs $120 to $225. A short straight run sits at the low end; a long run with elbows or a roof termination costs more. It’s worth doing on its own schedule, separate from the chimney, because lint buildup is a fire risk regardless of whether you burn fires. Call (833) 958-9616 for a quote.
Can you come today?
Same-day service is often possible. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (833) 958-9616 and we’ll find you a slot.
Why does my fireplace cost more to service than my neighbor’s?
Height, flue condition, and appliance type are the three big variables. A taller chimney with a deteriorated flue interior can cost several times what a standard sweep on a single-story home costs. The only way to know which category you’re in is an inspection, and ours is part of the estimate. Call (833) 958-9616.
Book a Free Estimate in Arleta
Chimney Sweep Arleta has served the Arleta area since 2017, and we handle chimney sweeping and inspection, chimney repair with DuraFlex liners and HeatShield resurfacing, and dryer vent cleaning. One provider, one accountable crew, professional-grade materials by name. Call (833) 958-9616 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Arleta market as of 2026. Chimney Sweep Arleta offers free estimates – call (833) 958-9616.
What Our Customers Say
"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Andres Vargas"We manage six rental properties and I've now sent them to four of them. Consistent every single time, which is not something I can say about most vendors we use."
- Henry Tran"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Holly Novak